
Hi:)

here is a link to the resin I used for the mould:

https://www.3djake.de/phrozen/tr300-ultra-high-temp-resin-grau?sai=11137&gclid=CjwKCAjw_aemBhBLEiwAT98FMmhalufoIpFTJMIfNfRljvbORhtw-NvCTFGZpidfdGEQ1msco09pRBoCX2kQAvD_BwE

This resin is a high temperature resin with the name "TR300 Ultra-High-Temp Resin Grey". It is very thermally resistant and produced by the company "phrozen".

The printer in which the mould was made can be found in the following link:

https://www.3djake.de/phrozen/sonic-mega-8k?sai=10981&gclid=CjwKCAjw_aemBhBLEiwAT98FMmJRJGAqVaXuUuMV7cFRFSds9_f0-QVTcnvj5AfDH7KzF8M7F1sn1hoCwQQQAvD_BwE

The SLA printer is called "Sonic Mega 8k" and also developed by the company "phrozen".